Fast Ethernet PCI Network Adapter PCI-TXM
  corega FEther PCI-TXM is a 32-bits 10/100Mbps Fast Ethernet PCI network
interface card. It delivers the reliable quality, superior performance and
ease of installation. The Installation could not be easier with a single RJ-45 port and a comprehensive set of software drivers for the most popular PC Network Operating Systems. corega FEther PCI-TXM is designed with bus master mode to optimize the maximum throughput for your network
bandwidth.

 
Go top of this page
  • Complies with IEEE 802.3/IEEE 802.3u/IEEE 802.3x Standard
  • ACPI/Wake On LAN (For PCI 2.2 only)
  • 10/100 Mbps Auto-Negotiation,full-/half- duplex
  • Supports 32-bit, 33MHz PCI Local Bus Master Version 2.2/2.1
  • Plug-and-Play installation
  • Web-based Management, easy to setup


 
Go top of this page

• Compliance Standard
IEEE802.3 (10BASE-T)
IEEE 802.3u (100BASE-TX)
IEEE 802.3x

• Protocol
CSMA/CD

• Interface
One RJ-45 connector supports Auto MDI/MDI-X
PCI v2.1 & 2.2

• Network Data Transfer Rate
10/100Mbps

• Cabling Requirements
10BaseT:Category 3,4,5 STP/UTP cable
100BaseTX:Category 5 STP/UTP cable

• Support OS
Windows 95/98/98SE/ME/NT/2000/XP/Vista,NetWare, Packet Drive, Linux/Unix, Mac OS

  

• Environment Requirements
- Operating
Temperature: 0~55˚C
Humidity: 20~95% , non-condensing
- Storage
Temperature: -40~70˚C
Humidity: 10~95% , non-condensing

• Physical Specifications
- LEDs: Link/Act
- Dimension: 121 (W) × 40 (D) x 22 (H)mm
- Weight: 48g

• Certification
VCCI Class B FCC Class B , CE

• Packing Content
- PCI Adapter
- Manual

 


 
Go top of this page
1. [Driver] PCI-TXM_Vista Driver
Ver. 6.108.331.2008/ 4,465kb /2008-08-05
2. [Datasheet] corega_FEther_PCI-TXM_en.pdf
Ver. 1.0/ 328k /2004-08-26
3. [Driver] PCI-TXM-Windows
Ver. 5.6/ 328k /2004-06-23
4. [Driver] PCI-TXM-linux2.4.x
Ver. -/ 75k /2004-06-23
5. [Driver] PCI-TXM-Mac OS 8.6~9.1
Ver. 3.1/ 25k /2004-06-23
6. [Driver] PCI-TXM-FreeBSD
Ver. -/ 30k /2004-06-23
 
   
©2007, corega Taiwan Inc.